Black-Excalibur Leather Belt

Code: BlackEXCAL-Belt

$57.00

Product Details

Black-Excalibur is a New Leather from the SB Foot Leather Tannery in Red Wing MN, USA that has a polishable semi-aniline surface made with Wet Stuff Retan, finished to a medium to bright luster. This leather is smooth to the touch with a slight waxy feeling that adds elegance to your belt. We back our belts with another layer of quality leather and stitch together with bonded nylon thread. NO RETURNS OR EXCHANGES, ALL BELTS ARE CUSTOM MADE TO ORDER (Please follow instructions before ordering)

Choose your buckle (Roller buckles include leather keeper but center bar buckles don't)

Choose your attachment: Chicago Screws

Hole spacing: 1 inch apart (message us if you want different spacing or extra holes)

Belt total thickness 4.5mm-5mm
Available in 2 widths: To fit a 1 1/2" wide buckle or to fit a 1 1/4" buckle (Narrow size)
Made in USA

Sizing Instructions:

Step 1:
Take your current belt and measure from the fold at the buckle end to the hole you use most, this hole will become the middle of 5 holes spaced at 1" apart on your belt. (Please use a Soft Measuring Tape to better follow your belt, used belts tend to curve with time so following that curve is important to get a more accurate measurement). This only applies to belts with a tongue (like those pictured) not "rodeo style" buckles (Please contact us if you plan to use a different style buckle). If you don't see your size offered or half-sizes please feel free to contact us.
*THIN or NARROW* Belts can also affect the measurements, so please add to the length if the belt you are measuring is very thin.

Step 2: (Please DO NOT SKIP Step One):
Step 2 is only used to double check your measurement from step 1 by comparing it to your pants size: Your belt size is generally 2" more than your pants size (Applies to **MEN'S Pants Only), but this is not always accurate because pant sizes vary from brand to brand.
IF YOU ARE IN BETWEEN SIZES WE RECOMMEND TO SIZE UP.