Indigo Portage Leather Belt

• Indigo Portage Leather is a full grain leather from the SB Foot Leather Tannery in Red Wing MN, USA that has a more natural look and feel because less finishing materials have been applied to it, allowing its natural beauty to shine through. We back our belts with another layer of quality leather from the same tannery and stitch together with bonded nylon thread.   NO RETURNS OR EXCHANGES, ALL BELTS ARE CUSTOM MADE TO ORDER (Please follow instructions before ordering)

• Choose your buckle (Roller buckles include leather keeper but center bar buckles don't) 

• Choose your attachment: Chicago Screws 

• Hole spacing: 1 inch apart (message us if you want different spacing or extra holes) 

• Belt width fits 1.5" wide buckle , 4.5mm-5mm total thickness

• Raw edge or Edge dyed, choose your preference.
• Made in USA.      

Step 1: 

 Take your current belt and measure from the fold at the buckle end to the hole you use most,  this hole will become the middle of 5 holes spaced at 1" apart on your belt. (Please use a Soft Measuring Tape to better follow your belt, used belts tend to curve with time so following that curve is important to get a more accurate measurement).  This only applies to belts with a tongue (like those pictured) not "rodeo style" buckles (Please contact us if you plan to use a different style buckle).  If you don't see your size offered or half-sizes please feel free to contact us. 

*THIN or NARROW* Belts can also affect the measurements, so please add to the length if the belt you are measuring is very thin.

Step 2: (Please DO NOT SKIP Step One):

 Step 2 is only used to double check your measurement from step 1 by comparing it to your pants size: Your belt size is generally  2" more than your pants size, but this is not always accurate because pant sizes vary from brand to brand. 

  IF YOU ARE IN BETWEEN SIZES WE RECOMMEND TO SIZE UP.